FT Simple Soarer Custom Motor Mount 16x19
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
While rebuilding my trusty old FT Simpler Soarer, I found jason51873's nice little custom motor mount and printed one…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
While rebuilding my trusty old FT Simpler Soarer, I found jason51873's nice little custom motor mount and printed one out right away. (https://www.thingiverse.com/thing:2506484)
Only then did I think about measuring the motor mounting holes and realized it didn't fit my NTM Prop Drive Series 28-26A 1200kv which has a 16mmx19mm mounting pattern. Whoops! So I designed this remix from scratch following his original design but made it fit the somewhat standard 16mmx19mm mounting pattern.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
.20
Infill:
20%
Notes:
This STL will come into your slicer upside down. MAKE SURE you flip it over 185 degrees to get the motor mounting area flat on the printer bed!
Post-Printing
Make sure to orient STL this way to avoid supports.
Enlarged vent hole to more easily allow motor wires to pass.
Ready for re-maiden
How I Designed This ===================Fusion 360
Category: R/C Vehicles