1 / 3
Sunlu S1 Filament Dryer holder for MK4(S) — image 1
1 / 3

Sunlu S1 Filament Dryer holder for MK4(S)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Sunlu S1 Filament Dryer holder for the Prusa MK4 (and MK4S)

Rating
5 / 5
Likes
9
Downloads
40
Makes
2
Views
267
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

I couldn't really find any Sunlu S1 holder for my MK4S, so I designed my own with some help from the model from: Dion Christensen The dryer sits flat, so there shouldn't be any issues with the filament rolling in the dryer. I've made 2 spacers so the holder parts are at the right distance and won't move. The addition of the back hook keeps the dryer from moving back and forth. It also fits in with the Prusa light bar from: In3DSpace. A variant with hexagon holes is available, as seen in the pictures

 

Printing

You need to print 2x spacer, 1x back hook, 1x S1_Holder_L variant and 1x S1_Holder_R variant.

 

Recommended print settings (100% scale, 0.4mm nozzle)

I made my holder with these settings. Change the following settings from your default settings. 
After printing make sure to completely remove the brim so the printing head doesn't collide with the holder when the printing head moves completely up.

Material

PETG 
or similar filament with more strength than PLA like ASA, ABS etc.

Number of perimeters

3
most of the strength will come from the perimeters so make sure to bump it up a notch

Infill

20% with your favourite infill type

Brim

on, 8 mm wide
I had some trouble with the holder parts curling up from the bed, make sure to use a wide enough brim

Brim separation gap

0 mm
My holder parts would curl upwards because they weren't firmly attached to the brim

Supports

Not necessary, supports can be a little bit hard to remove from the back hook recess in the holder part

Tags