1 / 4
Nespresso Vertuo Plus Replacement Capsule Container Krups XN900 MS-624276
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement capsule container for the Nespresso Vertuo Plus XN900 coffee machine. MS-624276
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 60
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one!
My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly.
I used 2 19x9x3.5mm magnets so that it attaches firmly to the back. I used a few dabs of super glue. I could have made it press fit but glue is easier :)
I would recommend a brim with no support needed.