Dewalt DCS565 Circular saw to 1-7/8 inch hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for the Dewalt DCS565 20-Volt MAX 6-½" circular saw dust collector to connect to any 1-7/8 inch shop vac hose
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 44
- Makes
- 0
- Views
- 468
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
An adapter for the Dewalt DCS565 20-Volt MAX 6-½" circular saw dust collector to connect to any 1-7/8 inch shop vac hose! I couldn't seem to find this adapter anywhere else and didn't want to sink the money into getting the Dewalt adapter and splicing it onto a new vac hose.
It's a snug fit on the vac side. But on the saw side, I put a strip of 1" gaff tape on the inside of the adapter for a very tight fit so that you can pull the vac out without pulling the whole adapter away. This is a necessary step as I made the adapter slightly oversized to allow for the strip of tape.
If you want to design something for this adapter, the 1-7/8" hose is 45mm wide, and the saw-side is 43.5mm with tape, probably just 43mm without tape.
Printed with standard fuzzy skin settings for better grip.
Printer: P1S
Filament: Creality Ender PLA+
Wall Loops: 3
Infill: 15% Grid. Only 9 layers of infill total!
Fuzzy skin: 0.8mm point distance, 0.3mm thickness.