1 / 7
Dewalt DCS565 Circular saw to 1-7/8 inch hose — zdjęcie 1
1 / 7

Dewalt DCS565 Circular saw to 1-7/8 inch hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter for the Dewalt DCS565 20-Volt MAX 6-½" circular saw dust collector to connect to any 1-7/8 inch shop vac hose

Ocena
0 / 5
Polubienia
5
Pobrania
44
Wydruki
0
Wyświetlenia
461
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

An adapter for the Dewalt DCS565 20-Volt MAX 6-½" circular saw dust collector to connect to any 1-7/8 inch shop vac hose! I couldn't seem to find this adapter anywhere else and didn't want to sink the money into getting the Dewalt adapter and splicing it onto a new vac hose. 

 

It's a snug fit on the vac side. But on the saw side, I put a strip of 1" gaff tape on the inside of the adapter for a very tight fit so that you can pull the vac out without pulling the whole adapter away. This is a necessary step as I made the adapter slightly oversized to allow for the strip of tape.

 

If you want to design something for this adapter, the 1-7/8" hose is 45mm wide, and the saw-side is 43.5mm with tape, probably just 43mm without tape.

 

Printed with standard fuzzy skin settings for better grip.

 

Printer: P1S

Filament: Creality Ender PLA+

Wall Loops: 3

Infill: 15% Grid. Only 9 layers of infill total!

Fuzzy skin: 0.8mm point distance, 0.3mm thickness.

Tagi