Eureka Precisa Weighing plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extends the surface to 170 x 83.5 mm flat area
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I could only fit 2 of my smaller cups on top of this scale when making a double shot. so i mostly opted to just weigh 50% of the yield. In order to change this i made this extension plate that can easily hold most cups. This plate is 2mm thick for those of you with small cup clearances like on a LMLMicra.
Currently i have the Eureka Digital scale Precisa (105x105mm) for wich i designend the Model.
It can be easily removed and add up to your convenience.
Please let me know if you discover any issues.
I printed it in PETG so i could use my Textured Build Plate, but PLA should be fine as well.
Should be printed upside down with support for the front ridge.