BTT SFS V2 Mount - 2020 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the BTT Smart Filament Sensor V2 for 2020 extrusions
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
This is a simple 2020 mount for the BTT SFS-V2. I had come across several, but stopped after #4-5, as they were all mounting the sensor in an orientation that wasn't working for me. I wanted my sensor mounted vertically as to allow the PTFE tubing to port into my umbilical entry on the back of my Voron V2.
I suspect I will be revamping this at some point as I've already thought about a few things to reduce the amount of filament used; tolerances on some of the counterbores, etc.
BOM:
M3x8 * 3
M3x12 * 1
M3 HH T-Nut
This will not work with a roll-in t-nut, as there is not enough spacing between the tabs. I might shorten these later to allow for roll-in's but this is where I've landed for now.
Print Settings:
Material - PLA should be fine, but would recommend PETG, ABS or ASA if you are heating the chamber of your printer.
Standard Voron printed part settings is what I use, but most anything within reason would be fine.