1 / 5
Dell keyboard KB7120W Batteries Lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement lid for the batteries compartment on a Dell Keyboard KB7120W
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
A replacement lid for the batteries compartment on a Dell Keyboard KB7120W. The batteries are falling out without a lid.
Print recommendation :
- Material: PLA, I used Creality White PLA;
- Without Supports;
- Print Speed: 300mm/s;
- Temperature : nozzle 220°C, bed 50°C;
Note: These setting were used on a Creality Ender3 V3 KE.
Improvements done to V2:
- The chamfer on the top site of the lid has a longer angle.
- Added the 4 hooks on the middle of the lid for a better grip.
- Made the lid thinner (from 2.5mm to 1.5mm) to reduce the used material.
Notes for V2:
- Overhangs of the hooks need to be cut out if overhangs settings in slicer are not fine-tuned.
- The lid flexes a little (can be seen in the last photo of this post.
V1 : first 2 photos.
V2 : next 3 photos.