1 / 3
Iphone 12 TPU case with camera and buttons cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Iphone 12 TPU case with camera and button covers
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 111
- Makes
- 0
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Printing:
I was using eSUN eTPU-95A Color Change by Temp for the case with generic settings and eSUN PETG Solid Black for the buttons.
Case:
- Material: TPU
- Infill:15-20% (with 3d pattern you will get a softer case)
- walls: 3 layers
- USE supports (auto)
Covers:
- Material: PETG, PLA etc..
- USE supports
After printing, remove any support materials (there should be a layer in the buttons too), you can glue the buttons and camera cover into the case or just simply place in them with the phone.
If any buttons are stuck after assembly, it is likely that the buttons are not properly inserted or not all the support material has been removed.