Busch Jaeger Busch-balance SI - Light switch cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cover for the Busch Jaeger Busch-Balance SI light switch series
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
I want to replace my regular light switch with a Tuya smart switch. Since I prefer not to bridge the old switch permanently, I decided to use a cover and attach the smart switch to it instead. During my search for a suitable model, I came across the original design. However, it didn’t align perfectly with the switch series in my home, so I made some modifications to better suit my needs.
Print recommendations:
- Material: PETG
- Layer height: .2mm
- Bottom / Top Layers: 4 / 6
- Supports: yes - organic
- Infill/Perimeters overlap: 25%
- Infill: 15%
How to install? (copied from the original model)
You have to remove the covers of the Busch Jaeger switch and get the clip part off the switchplate, mount the clip in the printed base and place it on the base in the wall.
Stick the Tuya switch on the mountbase.