HGUC GM Sniper II elbow mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Edit 28.12.20 Added the elbow 2.0 piece, which should have a better connection to the elbow armour. You will need to…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 42
- Makes
- 0
- Views
- 749
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit 28.12.20 Added the elbow 2.0 piece, which should have a better connection to the elbow armour.
You will need to print 4 of the PC adapters and 2 of the other parts.
The joints are not as stiff as the original but achive a bend of abot 135 degrees.
This was a learning experience for me and the models could probably be better so if you want to feel free to remix them as you whish or write some feedback.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
.1
Filament: Basicfil pla Post-Printing
Depending on your settings and printer you might need to sand some parts down or process them in other ways.
You will need 4 lengths of runner material I used the softer Polycarp ones on the elbow joints and regular ones on the shoulders you'll also need the two nr 10 polycaps which come as extras.
Category: Hobby