1 / 1
Automatic nozzle cleaning - CR10s pro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Automatic nozzle cleaning for the Creality CR10s pro
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I made cleaning brush holder for the cr10s pro. It was print from PETG. You can adjust the adapter for the brush. I use this one https://www.unihobby.cz/kartac-na-svicky-150x15mm
Video
G-Code
Main code – add to your config.cfg klipper file. After that you can call the macro “CLEAN_NOZZLE”
[gcode_macro CLEAN_NOZZLE]
gcode:
G90 ; Abs move
G1 Z10 F3000 ; Safety move
G1 X314 Y40 F6000 ; Starting point X and Y - HERE you will change
G1 Z3 ; Starting Z point - HERE you will change
M400 ; Wait for the moves;SET_VELOCITY_LIMIT VELOCITY=300 ACCEL=3000 ;You can adjust max speed and acc - remove the ";"
{% for _ in range(3) %} ; Repeate the move 3 times
G1 Y40 F30000 ; Cleaning move - you can change the speed
G1 Y5 ; Cleaning move - you can change the end pos
M400
{% endfor %}
;SET_VELOCITY_LIMIT VELOCITY=150 ACCEL=1500 ; Set back the limits
G1 Z10 F3000 ; Safety move</code></pre><p>ENOJY!</p>