OddityRC Toothpick LOS canopy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Canopy for line of sight flying with the OddityRC toothpick.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Compatability: It has only been tested on the 5-inch version; however, it should fit the 4-inch version as well. Check dimensions for compatability with other frames.
Dimensions:
Canopy outer dimenstions 51x51x19mm
Hole spacing 32,5x32,5mm
(Small version: 25x25mm spacing)
Hardware:
Insert dia: 2mm
Screws M2x10mm
(Small version: M2 Stack screws)
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Design Features: The top of the canopy is thinner in the middle for better GPS satellite reception. I use a GPS on the LOS drone for rescue in case I lose the orientation of the quad.
3 different looks:
Shown in pictures
For sligtly more prop clearance
Smaller and mounts on top of the FC.
Filament: PLA
Change Log:
Rev 01 : Cutouts for mounting inserts - When installing the inserts in the original design, the PLA melted around the attachment holes, as seen in the pictures.
Rev 02 : Made a cutout for the USB-C port for easy access, and hole in the front for an LED.
