MFT Glue Bottle and Can Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a glue bottle and can holder that slides into the rail of the Festool MFT table.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 46
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a glue bottle holder and a can holder that slides into the rail of the Festool MFT table. It goes on the side so it stays off the table giving you more work surface.
There are three sizes. All sizes will hold a 16oz glue bottle spout down so the glue can be dispensed easily. The smaller size (61mm) will hold small soda cans like Red Bull. The medium size (67mm) will hold regular size soda cans. The largest size (77mm) will hold a soda can in a cooler or any can up to 77mm in diameter.
Print these in upright orientation. If you can span 3mm no support is necessary. If you really want a clean connection put some support under that gap that slides onto the MFT rail.
I like to print these in PETG and use 40% - 60% infill for strength. They will certainly work in PLA or other not too flexible materials.
Enjoy.