Paint Shaker Engine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A way to shake your model paint bottles
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 45
- Makes
- 0
- Views
- 573
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For the longest time I have been trying to design my own piston paint shaker. Then I came across this last night, and checked the size. Almost perfect for what I needed. In scaling it up, I had to remove at least 1 piston, but chose 2, as it made it a uniform modification to the build.
Wanted to be able to drive it with a drill (which was done in the sample video I saw that brought me to the source model) so I made an attachment for it.
Printed in PLA at .2mm with 4 walls. Used supports only where holes are drilled in the model and for the attachment piece, the rest should print fine without any supports. In general infill was set to 10% except for the attachment, and the area where the attachment connects to the shaker. In those places I set a modifier to set the infill to 80%.
Enjoy!