Paint Shaker Engine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A way to shake your model paint bottles
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For the longest time I have been trying to design my own piston paint shaker. Then I came across this last night, and checked the size. Almost perfect for what I needed. In scaling it up, I had to remove at least 1 piston, but chose 2, as it made it a uniform modification to the build.
Wanted to be able to drive it with a drill (which was done in the sample video I saw that brought me to the source model) so I made an attachment for it.
Printed in PLA at .2mm with 4 walls. Used supports only where holes are drilled in the model and for the attachment piece, the rest should print fine without any supports. In general infill was set to 10% except for the attachment, and the area where the attachment connects to the shaker. In those places I set a modifier to set the infill to 80%.
Enjoy!