Double 3D Chameleon Mounts + Klipper Config
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
allows for using a secondary MCU and a third stepper to make the 3d Chameleon 8 color
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 94
- Makes
- 0
- Views
- 754
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I am uploading this to share my code for the 3D Chameleon that uses an additional stepper to achieve 8 color printing.
This was created by timb8907. We have been chatting back and forth and this is the most reliable code for the K1 Max I have come up with. This is adaptable to any printer running Klipper, just need to change coordinates and stuff.
You will need to add these two .cfg files to the same folder as your printer.cfg, and add these two lines to your printer.cfg file:
[include chameleon_steppers.cfg]
[include chameleon_macros.cfg]
Be sure to change your values if you don't have a K1 Max, like coordinates and cold-zone distance.
The values in chameleon_steppers are specific to the BTT SKR E3 V2 boards, you may need to find out the pins for your board's stepper outputs.
My code sets them up like this:
X=Chameleon, Y=Selector, Z=Chameleon2
Dec '25: Added a few variations