Counting matching models…
These are the files needed to mount the 3DChameleon onto the Creality K1 and K1 Max printers. Also included is the profile for the K1 (K1 Max just needs the distances and build plate size adjusted.) To install: Remove the front left screw…
This is a set of Mk4 upgrade parts for the 3DChameleon Mk2/Mk3 that allow the PTFE tubes to be gripped and held in place without the need for using the brass compression fittings. There are 5 models in this, the A+, B+ and C+ parts (which…
This is the full set of printed parts and PrusaSlicer profile to mount the 3DChameleon Mk3 onto the Sovol SV-06 printer and the SV-06 Plus. This set includes the 3DClippy filament cutter used to cut off the tip of the filament so it can…
This Printable includes the main mount and switch mount to mount the 3DChameleon Mk3 onto the BambuLabs series of printers. The large Base Mount holds both the 3DChameleon and the Electronics Enclosure on the back of the printer. There…
This is the coupler from the video where I walk you through the PC4-M10 PTFE Coupler to allow the 1.8mm ID PTFE tube to be used to constrict the melted filament as it is retracted out of the hot end to a diameter that will fit within the…
Simple Y adapter mount for Creality K1 Everything what you need to use it is 2x zip ties and 2x M3 screws 12mm
If you're encountering an issue where the #1 or #2 extruder are having too low of a pressure despite the adjustment of tension sliders is maxed out, try these A+ models to slightly lengthen the distance of between the motors… this will…
**PROJETO EM ANDAMENTO, AINDA NÃO FOI CONCLUIDO** Montando o 3DChameleon na K1C e K1 Max Estou iniciando minha jornada no 3DChameleon e, como não encontrei um conteúdo fácil de modificar ou montar para minha K1C e K1 Max, decidi criar…
I didn't like how the 3DChameleon MK4 parts were spread around Printables, Tinkercad, and the 3DChameleon Forums. I brought as many generic parts as I could think of for the MK4 here that weren't already on Printables. UPDATE: I have…
holder for the 3d chameleon addon. i printed this for my flashforge adventurer 5m pro to hold it on the back side. i redesigned it after my second print so it would be good for you to download but for me it was good enough after some…
I have my printer flush against the wall so was not able to use the mounting place provided by Bill at 3dChameleon. I created my own version which is minimal and is held in place by friction and weight of the printer itself. Use at your…
This is a simple 4 Color printed spool holder for the 3DChameleon. Print two of these and connect them with 3 8mm Steel Rods 300mm long.
Here are the 3DChameleon mounts for the Qidi X Max 3 printer. Also included is a “beta” of the PrusaSlicer profile. It might need some minor tweaks… and if you find anything it needs, please let me know. There are 3 STLs you need to…
Great little test of your 3DChameleon... a keychain! Use it to calibrate and test your 3DChameleon on your printer! Works great as a keychain as well!!!
This is an adapter to allow a PTFE Tube to connect to the Ender 3 / CR-10 style extruder using a PC4-M10 connector. This allows the 3D Chameleon to automatically load and unload the filament. (Note, it adds about 2mm of height to the…
Update: 4/13/2024 - v2 Released! This revision improves slicing by adding 1mm of travel past the filament. The previous design did not account for wear on the blade and failed as a result after a short time. The new design also increases…
This is a replacement lever tension arm for the Titan extruder clone to allow a PC4-M10 PTFE connector to be attached to allow the 3D Chameleon to feed the extruder. Category: 3D Printer Accessories
I battled with the original profile and the quick change because of the tip shaping always causing jams. Please ensure to double check your switch location settings and tube length, from the outlet to the splitter my longest runs are…
This is a replacement mount for the stock extruder to allow a PTFE tube to be fed into the extruder. Replace your stock metal bracket with this and add a PC4 M10 PTFE connector. Category: 3D Printer Accessories
These mounts are needed in addition to all the parts already included in the 3DChameleon to mount the switch to the underside of the build plate's Y axis. The angle mount for the 3DChameleon itself should be used in it's stock…
A 3dChameleon switch mount for the Qidi Q1pro. May also work with other Qidi printers. Mounts vertical above the rear left motor. Use 1 small screw in the center mount hole to secure switch to mount. X,Y location is x=0, y=245. switch…
TLDR: 3D Chameleon is a (now) open source 4 filament AMS that can be used with many different printer models. Getting it to work well on an AnkerMake M5 using Orca Slicer (and in a compact space) took quite a bit of tinkering. Bottom…
I designed a mount for 3DChameleon Mk4 Pro. The cables come out from the side of the case. You can attach the case and 3DChameleon unit to a metal rack with the hooks. Note : the hook design is based on the frame of the metal rack in my…
Printed in ABS with 40% infill and 4 walls. Use paint on supports where the cutter arm goes into the extruder adapter and on the tip of the cutter arm. PLA might work better, but I didn't have any on hand.
These are the mounts for the 3DChameleon to attach it to the Peopoly Magneto X. The main 3DChameleon mount uses two M3x10 screws to affix it to the left side of the MagnetoX's top rail. The 3DChameleon will fit inside the holder and can…
Here are the 3DChameleon mounts for the Qidi X Plus 3 printer. There are 3 STLs you need to print. The 3DChameleon mount itself (Print at 100% or 101% scale factor) (which is a remix of…
I like the idea of controlling the 3D Chameleon with a GPIO signal from my 3D printer's control board. This is easily accomplished using the signal line and ground of the switch input connecter. The only problem is that commands cannot be…
Bracket for mounting 3DChameleon switch assembly on Y-axis rail of Creality Ender3 Pro. Sorry, I used the wrong plane when I created the part. Rotate and print it with the longest side of the part down.
I'm waiting on my kit to show up tomorrow, but I printed this one and it was hitting the electronics on the top of my extruder so i modified it. If thats stupid on my part please let me know Bill. You can see in the photo that I had to…
Printing Specs! Print at .2mm layer height, 100% infill Here is my design of the 3Dchameleon MK4 part B and C! I've modified theses parts to be bolted together and for PTFE tubes to thread in. ( i have not printed theses parts in along…
I couldn't find a switch mount that I liked the position of. I looked at y-axis and z-axis mounts I've seen and none of them seemed to be what I wanted. I created a mount to replace the cap on the end of the x-axis (where the belt tension…
These are the top and switch mounts for the 3D Chameleon for the Neptune 3 Pro series and higher.
I have an "after market" bed heater cable support attached and the original 3D Chameleon endstop by Rnconync was to tall
Just an edit of Neptune 796's Artillery Sidewinder Palette adapter to allow a PC4-M10 PTFE adapter to be used instead for the 3D Chameleon and the Prusa style MMU. It is recommended to print it with 100% infill. Category: 3D Printer…
Allows you to attach the 3DChameleon Endstop to a Bear frame
This is a PTFE PC4-M10 Adapter for the SeeMeCNC EZR Struder to allow a bowden coupler to attach to the in feed of the EZR. This allows the 3D Chameleon to load and unload the filament automatically. Category: 3D Printer Accessories
Welcome!, here you will find my brackets or mounts if you prefer for the 3dchameleon. I have made the Switch bracket first. The other will soon follow. Switch Bracket BOM: 1x M3 6mm screw 1x m3 8mm screw I have this attached to the right…
I didn't have any M2 screws, but I did have M3 inserts, so I remixed this on Tinercad to add holes for the inserts. Printed with PETG to withstand the heat of the cabinet.
3DChameleon switch assembly mount for Y-axis of Creality Ender3 S1. Attaches to the screw holding the cover of the Y-axis belt tensioner. The original screw will need to be replaced with a M3-16. Caution: the part is thin to clear the bed…
I didn't have any M2 screws that Bill designed this for, but I did have inserts and M3s, so to tinkercad I went. Printed it with PETG to ensure it can withstand the heat of the chamber. Worked beautifully.
https://cad.onshape.com/documents/fb7b8e8cd253dee8fe0b3e05/w/49694d5233130957590d1f8b/e/5d036e2f3051e63d08976ae1?renderMode=0&uiState=6781b7cbd7003409359689ae
3DChameleon holder and splitter filament with microswitch KW11-3Z.
3dchameleon 4y adapter holder for BMG direct drive. Original 3 x m3 screws need to be replaced by 10 mm longer ones . Use small ziptie to secure .
3DChameleon holder and splitter filament with microswitch KW11-3Z.
This Printable includes the main mount and switch mount to mount the 3DChameleon Mk3 onto the BambuLabs series of printers. The large Base Mount holds both the 3DChameleon and the Electronics Enclosure on the back of the printer. There…
Here are the 3DChameleon mounts for the Qidi X Max 3 printer. Also included is a “beta” of the PrusaSlicer profile. It might need some minor tweaks… and if you find anything it needs, please let me know. There are 3 STLs you need to…
