K1/K1 Max 3dChameleon Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created a mount which slides underneath the printer and hold the 3D Chameleon in place. No fasteners are needed.
- Rating
- 0 / 5
- Likes
- 57
- Downloads
- 119
- Makes
- 0
- Views
- 6,636
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have my printer flush against the wall so was not able to use the mounting place provided by Bill at 3dChameleon. I created my own version which is minimal and is held in place by friction and weight of the printer itself.
Use at your own risk! I have not done enough testing to advise on any effect from the heat generated onto the side acrylic. There is also a chance a stuck filament will drag the printer and the entire table into the dark abyss. Happy testing!
Note: Pictures of v1 where the cutouts for the outside bolts were 6.5mm. In v2, I have widened them to 7mm to fit bitter and made them partial instead of all the way through.