Rii K06 Mini Bluetooth Keyboard Remote Holder Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remote holder for the Rii K06 Bluetooth Keyboard and it's USB-A dongle, mounted easily with just one cone head screw.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 1
- Views
- 256
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Rii K06 Mini Bluetooth Keyboard remote holder:
- exact fit- perfectly hold the Rii K06 Mini Bluetooth Keyboard (and its USB-A dongle) that I got on Amazon- (this one) https://amzn.to/3DE9kpZ
- easy print- all one piece, just print in place vertically.
- easy mount- just one short conehead screw at the top of the print is enough to secure it to most solid surfaces like wood.
I use this remote holder to secure my Rii K06 Bluetooth Keyboard inside of my DIY Arcade Machine, should I ever need a mouse and keyboard to adjust anything on the arcade's computer rather than just use the arcade buttons, but you can use it for anything really- just mount it to a solid surface and it should hang straight down, but I tightened my screw enough to keep it at an angle.
Printing:
- Print in place vertically, with the screw hole at the top.
- I used the most basic settings on normal mode on my FlashForge Adventurer 5M Pro with 0.6mm nozzle, using generic 1.75mm filament- so, layer height 0.3mm, infill 15%, and print speed 200mm/s with no issue.
- It's a tall-ish print for its light weight- it didn't fall over during printing for me, but if it does happen to fall over for you, I would simply try again with a slower print speed.
For personal use only- no commercial license is available at this time. Enjoy!