Clothesline Tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a simple screwable line tensioner.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 70
- Makes
- 1
- Views
- 887
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- BSD License
I have designed a simple screwable line tensioner. It consists of two parts.
LineTensioner_Hook: designed with opening to be hung on the wall.
LineTensioner_Thread: is screwed into LineTensioner_Hook. A hole allows to pass and to knot the line to be tensioned.
I know that the threads are not printed in the optimal orientation, but I for intended purpose, it should be sufficient.
Print instructions
Material: ABS or PETG
Layer height: 0,2 mm or less (for the threads)
Perimeters: 5
Infill: 20-40% Honeycomb (personal preference)
Supports: yes on build plate for LineTensioner_Hook
Temperature: maybe a bit higher than usual, to increase layer bonding
one Line Tensioner needs about 2 hours to print
I printed the model in abs on a voron and prusament petg on a MK3S and it works fine