Clothesline Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple screwable line tensioner.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 887
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- BSD License
I have designed a simple screwable line tensioner. It consists of two parts.
LineTensioner_Hook: designed with opening to be hung on the wall.
LineTensioner_Thread: is screwed into LineTensioner_Hook. A hole allows to pass and to knot the line to be tensioned.
I know that the threads are not printed in the optimal orientation, but I for intended purpose, it should be sufficient.
Print instructions
Material: ABS or PETG
Layer height: 0,2 mm or less (for the threads)
Perimeters: 5
Infill: 20-40% Honeycomb (personal preference)
Supports: yes on build plate for LineTensioner_Hook
Temperature: maybe a bit higher than usual, to increase layer bonding
one Line Tensioner needs about 2 hours to print
I printed the model in abs on a voron and prusament petg on a MK3S and it works fine