1 / 2
ROKR Space Port BB Part LGC01
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Rokr Space port marble run LGC01
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
For the Rokr Spaceport marble run LGC01.
These small pieces are fragile and known to break, this replaces that part as it can take weeks for the replacement part to arrive and they charge shipping.
This piece costs around 0.01p to print and is stronger.
- Printer: Creality Ender 3 V3 SE
- Nozzle = 0.4
- Quality = 0.2 ‘Standard’
- Medium = Bambu Charcoal PLA+
- Inner wall speed = 75
- Print Speed = 100
- Outer wall speed = 50
- Top/Bottom speed = 50
- Infill = 100%
- Print Temp = 200c
- Print Bed Temp = 65c
- Print Time = 0 Hours 12 Minutes.
- Support = No
- Brim - Yes, 5 lines ‘outside’ as its a small piece.
- Ironing = Yes ‘zigzag’
Be sure to print slow for success with this part.
Dimentions: 26.4 x 16.7 x 2.0mm
Material use: 1g / 0.22m