Deckbox for various TCG's
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Deck box. Easily holds 100 double sleeved cards with room for tokens, sideboard, etc.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
There are a lot of deckbox models out there, but none of them were exactly what I was looking for. I wanted something rugged with a friction fit lid that wouldn't come open if dropped or tumbled around in a bag. I also wanted a box that was also easy to use and get a deck in and out of. This is what I came up with.
Outside dimensions:
79mm W x 89mm L X 105MM H
Inside dimensions:
68mm W x 77mm L x 100mm H
Please note:
The lid is a friction fit. IT WILL BE TIGHT. Depending on your filament and your nozzle, you may have to sand/file the outside edges of the raised inner lip of the box to get it to open and close without it being a struggle. I designed it to be tuned after printing in this way so you can get a perfect fit for your use. Runs great in PLA and PETG. I've used 0.4 and 0.6 nozzles in an AD5M slicing with Orca successfully many times.