Print In Place Hinged End Brackets for Govee Light Bars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place hinged brackets for VHB taping to the back of curved monitor backs
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 72
- Makes
- 1
- Views
- 535
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Print Settings (Should be in 3mf project file):
Material: PETG
- PLA will stress fracture over time and PETG hinges more nicely
Layer Ht: 0.3 mm
Perimeters: 3
Top Solid Layers: 6
- Helps with waviness from the default 4, purely aesthetic
Infill: 10%
- Not a critical thing for something this lightweight
When trying to attach the Govee H60561 light bars to my monitors, the curved backing proved problematic, not letting the VHB tape stick to the light very well. Having a hinged bracket would all it to more easily follow the curve of the monitor.
Two of the brackets are for the non-wired ends of the lights and the slotted brackets are to be used with the ends of the lights with the wires connected.
I used the interface from not michael's brackets and added some extra geometry for a hinge to either side. The two assemblies are just mirrored pieces and can be printed in location. Just pull off the plate and wiggle a little to break the hinges free.