Festool_MFT_Phoneholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Selfclamping Mobile phone holder for the rails of Festool MFT tables.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts list :
1x BackPlate
1x FrontPlate
1x Sled
2x Arm
Optional:
1x weak rubber band
Printing instructions
Recommended print settings:
Nozzle: 0,4mm
Layer height: 0,15 mm
Material: PLA, PETG or Higher quality material
Recommended print orientation can be find in the attached .3mf File.
Assembly instructions
Step 1:
Prepare all printed parts and optionally a weak rubber band.
Step 2:
Get the BackPlate ready and insert the Sled.
Step 3:
If desired, place a weak rubber band in the groove of the Sled and attach it to the left and right pin.
Step 4:
Insert the two arms into the 4 unused pins.
Step 5:
Get the FrontPlate ready.
Step 6:
Press the FrontPlate with feeling through onto the rest of the assembly until all three catches engage.
Step 7: Assembly Finished!!!
You finished the assembly and the holder is ready to use.