Festool_MFT_Phoneholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts list :
1x BackPlate
1x FrontPlate
1x Sled
2x Arm
Optional:
1x weak rubber band
Printing instructions
Recommended print settings:
Nozzle: 0,4mm
Layer height: 0,15 mm
Material: PLA, PETG or Higher quality material
Recommended print orientation can be find in the attached .3mf File.
Assembly instructions
Step 1:
Prepare all printed parts and optionally a weak rubber band.
Step 2:
Get the BackPlate ready and insert the Sled.
Step 3:
If desired, place a weak rubber band in the groove of the Sled and attach it to the left and right pin.
Step 4:
Insert the two arms into the 4 unused pins.
Step 5:
Get the FrontPlate ready.
Step 6:
Press the FrontPlate with feeling through onto the rest of the assembly until all three catches engage.
Step 7: Assembly Finished!!!
You finished the assembly and the holder is ready to use.