Enclosure for Kobra 3 + combo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Tutorial on the Enclosure :
Print:
8x the base
28x railings or 24x holder or for budget 12x 2 for each plexi glass(but there will be a gap )
Plexiglass:
The width of it should be around 62,8-62,5cm
The length should be of 70cm
You will need an M5 Bolts + Nuts (for connectors) , screws about 5mm diameter, wooden 12 sticks of these measure 3x3x70cm and 1 stick 3x3x64cm
Optional : wooden board 64x64x3cm
I recommend to print it with petg .
And I would recommend these hindges from this guy: https://www.printables.com/model/1108145-durable-hinges/files
Credit: @RomanZelenak_1104777
But it doesnt matter which hinges you use
+will add more accessories holder and Etc.
(to not be confused i dont have budget for plexiglass so i send the models for you to create it :) )
PLEASE CHECK IT IF IT FITS I AM NOT SURE