Counterweight for Stealth Press 1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple saddle with M12 bolts that slips onto the press arm to add a calibrated weight to it.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
This accessory is ideal for those who equip their Stealth press with a Pinecil or TS100 iron. The Key-Bak Super48 pull is a bit too powerful for such light irons and the arm will slam into the top of the press if released from the bottom after inserting a heat set. This accessory adds just enough weight to the arm assembly to slow down its upward return motion.
For the counterweight, you will need 4 M12 x 35mm hex head bolts that screw into the saddle. This should bring the total weight of the assembly to somewhere between 190-200 grams. For more or less weight, you can experiment with the number of bolts and different lengths.