Counterweight for Stealth Press 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple saddle with M12 bolts that slips onto the press arm to add a calibrated weight to it.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
This accessory is ideal for those who equip their Stealth press with a Pinecil or TS100 iron. The Key-Bak Super48 pull is a bit too powerful for such light irons and the arm will slam into the top of the press if released from the bottom after inserting a heat set. This accessory adds just enough weight to the arm assembly to slow down its upward return motion.
For the counterweight, you will need 4 M12 x 35mm hex head bolts that screw into the saddle. This should bring the total weight of the assembly to somewhere between 190-200 grams. For more or less weight, you can experiment with the number of bolts and different lengths.