1 / 4
Rockler Needle-Nose Clamp Jaw
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement jaw for a small needle-nose clamp.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 17
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I lost a jaw from my small Rockler brand needle-nose clamp and could not find a way to get a replacement from the manufacturer so I made my own. Hopefully this is helpful to others in the same predicament.
I made some test prints of the jaw out of PLA at 0.15mm layer height and 100% infill with a 0.4mm nozzle. They fit well and seem to be strong enough. I tried a couple of printing orientations (see photos) to determine the best layer orientation for strength. It does not really seem to make a difference.