Intel 10GbE X540 NIC Cooler Fan Shroud - Single Slot Low Profile - WIP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single slot, low profile cooler bracket that should fit most Intel X540 NICs.
- Rating
- 4 / 5
- Likes
- 20
- Downloads
- 108
- Makes
- 0
- Views
- 728
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This model allows for the active cooling of most varieties of X540 10GbE NICs, including a modified model that works better on some of the actively cooled units that are more prone to fan failure. It positively engages with the metal rail on the bottom side of these cards for a very solid fit.
It uses a fairly easy to get 5015 radial blower fan, can be more securely attached to the card with an M2 retention screw, and fits in a single low profile slot.
I am using a Sunon EF50151BX-1C02C-S99 4-pin PWM fan for both card models I am designing around, and it keeps the heatsinks quite cool to the touch, but basically any 5015 radial fan should work as long as it has the same mounting holes.
I made this because I was sick of needing to waste an additional PCIe slot to fit a 40mm cooler fan onto these cards to keep them from overheating in lower airflow environments.
The main caveats of this design:
- it extends the length of the card by about 55mm so it may interfere with cable placement or not fit in cramped cases.
- This requires the metal rail at the bottom of the card to be facing outward away from the heatsink. I have seen some models where the rail curls inward toward the heatsink
- The extended model works slightly less effectively but still fairly cool.
- If your card does not have the rail these may not attach well/at all.
Based off of board design it should also work with X520 NICs but I have not tested this.
Also available on Thingiverse under the same name