1 / 4
IKEA STRIMSÄV adjustable mount for IKEA SKADIS — image 1
1 / 4

IKEA STRIMSÄV adjustable mount for IKEA SKADIS

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An adjustable Strimsäv Spot mount for your Skådis Board

Rating
0 / 5
Likes
6
Downloads
33
Makes
0
Views
350
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial

I searched a neat way to use the Strimsäv spot as a small workshop lamp.

To build this print you adittionally will need:

1x screw M4x10 (at least, but longer ones will work, too)

1x M4 nut

 

slice with 0.2mm, 3 layers, 15% infill, no support needed, use outer brim only (if desired)

 

To mount it, you will need to place the hook with the triangle facing upwards.

Place the M4nut in the notch on the mountig plate.

Click the plate on the hook with the angled site upwards

Put the screw in the hole on the main part and fasten it on the plate with the cable port facing upwards.

Done!

 

You also can pull the power cable though a hole of your skadis plate and plug it in the spot to hide the long cable. Make sure the port is facing the right direction!

Tags