IKEA STRIMSÄV adjustable mount for IKEA SKADIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adjustable Strimsäv Spot mount for your Skådis Board
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I searched a neat way to use the Strimsäv spot as a small workshop lamp.
To build this print you adittionally will need:
1x screw M4x10 (at least, but longer ones will work, too)
1x M4 nut
slice with 0.2mm, 3 layers, 15% infill, no support needed, use outer brim only (if desired)
To mount it, you will need to place the hook with the triangle facing upwards.
Place the M4nut in the notch on the mountig plate.
Click the plate on the hook with the angled site upwards
Put the screw in the hole on the main part and fasten it on the plate with the cable port facing upwards.
Done!
You also can pull the power cable though a hole of your skadis plate and plug it in the spot to hide the long cable. Make sure the port is facing the right direction!
