[Remix] Adjustable Ruler Positioning Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the "Adjustable ruler block, 90° and 45° angles" by ishikawats.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 168
- Makes
- 3
- Views
- 445
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the "Adjustable ruler block, 90° and 45° angles" by ishikawats.
I like the overall design of the original model a lot, simple and easy to use.
I felt the tightener is a bit tight (probably my slicer or printer settings), so I made a few minor changes.
- the base block - the length and the size of the threads (3mm longer)
- the tightener - the shape (also the threads)
- the sliding jaw - the length (2mm shorter)
The main reason of this remix is to increase the thread pitch for smoother movement of the tightener, while keeping the original model as the base.
If the tightener is stiff and difficult to turn, try tightening and loosening the tightener a few times. It should loosen up eventually.
I used PLA (grey color) for “the base block” and “the sliding jaw”, PETG (orange color) for “the tightener”.