1 / 2
Makita Router lipping guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An add-on for Makita trim routers, that makes flush-trimming of lippings and edgins easier
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 36
- Makes
- 0
- Views
- 655
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is an adaptor for use with Makita trim routers (and clones, eg Katsu). It fixes to the trim base of the router, which should be fitted with a bearing-guided flush trim bit. The adapter provides a much larger guide that runs on the surface that is being lipped, and reduces the tendency of the router to tilt.
In addition to the 3 printed components, the device requires the following hardware:
- a piece of M6 studding, approx 160mm long;
- a piece of 6mm ID/8mm OD steel tubing, approx 140mm long
- 1 M6 full nut
- 2 M6 Nyloc nuts
- M6 washers
No special printing requirements - PLA is fine.
A STEP file is included, showing all the assembly details