Charge Station Base/Stand - Tablets and Phones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Charge station base and stand for a Tablets and Phones
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 62
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Charge station base and stand designed to hold a multi-USB charger within it. The top will bolt onto the bottom with 4 standard M3 x 12 or so socket head cap screws. You'll probably need to work a bit to carefully thread them out as the holes are fairly tight. Internal space is approximately 150mm wide x 95mm deep x 40mm high.
There are a number of air vents in the top to allow for any heat build-up from the charger to vent off. The center stand space should be large enough to accommodate a tablet with case, while the others are more suited for phones.
The base has a single wider entry slot for mains/AC input and multiple smaller slots for the USB charging cables output.