Charge Station Base/Stand - Tablets and Phones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charge station base and stand for a Tablets and Phones
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Charge station base and stand designed to hold a multi-USB charger within it. The top will bolt onto the bottom with 4 standard M3 x 12 or so socket head cap screws. You'll probably need to work a bit to carefully thread them out as the holes are fairly tight. Internal space is approximately 150mm wide x 95mm deep x 40mm high.
There are a number of air vents in the top to allow for any heat build-up from the charger to vent off. The center stand space should be large enough to accommodate a tablet with case, while the others are more suited for phones.
The base has a single wider entry slot for mains/AC input and multiple smaller slots for the USB charging cables output.