1 / 13
Clamp-On Vise - Fully 3D Printable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE
- Rating
- 4.917 / 5
- Likes
- 2,103
- Downloads
- 5,005
- Makes
- 27
- Views
- 24,451
- Reviews
- 24
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE
Additional Parts:
3x Retaining Clip.stl
2x Guide Rod A.stl
2x Grip.stl
Assembly (See Pictures):
- Adhere Frame Base Pad TPU to Frame.
- Install Grip TPU to Frame and Vise via dovetail slots.
- Partially thread in Mounting Bolt.
- Thread Mount Plate TPU onto Mounting Bolt.
- Mount the vise to a benchtop to complete the following steps.
- Feed both guide rods through the Frame and Vise.
- Attach one Retaining Clip to the grooved sections at the base of each guide rod.
- Install Threaded Rod all the way through the Frame and Vise.
- Attach the final Retaining Clip to the end of the Threaded Rod.