1 / 8
Multimeter case for the AstroAI AM33D or any other Multimeters — image 1
1 / 8

Multimeter case for the AstroAI AM33D or any other Multimeters

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Multimeter case designed specifically for the AstroAI AM33D. Can be resized to fit other multimeters

Rating
5 / 5
Likes
15
Downloads
146
Makes
2
Views
515
Reviews
2

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a multimeter I designed specifically to hold my AstroAI AM33D multimeter. It is inspired by Coat's Multimeter case and I've also used several of the smaller parts from his file along with the “multimeter” word cutout, thus the reason why I'm posting this as a remix rather than an original model. 

The case fits the AM33D snugly and has a separate compartment that fits the probes as well as the manual (because I'm not actually good with using a multimeter and feel like I may need the manual one day :D )

I designed the case in a way where the walls of the compartment holding the multimeter dips down lower to allow easy access to the multimeter. I originally printed the walls with the same height and realized it was pretty difficult to remove the multimeter, sometimes requiring me to flip the case upside down to get it out. With this design, I can keep the case on my desk and easily take the multimeter out. 

I've redesigned the hinges on the case so that it's easier to install the screws and give it a cleaner look. The holes on the outer hinges are now bigger to allow the screws to slide into the hinges easily. The holes on the inner hinges are now the smaller ones so that you tap into them with the screws. The outer hinges are tapered to allow the use of tapered screws, which will hide into the hinge iteself. I use M3x12 tapered screws for my build but you can of course use any other M3 screws as long as they're long enough to reach the inner hinge. NOTE: Do not overtighten the screws as this will squeeze the hinges together, making the cover difficult to remove.

I personally love the hexagon patterns but I admit this adds unnecessary print time. I still think it looks really cool though :D Feel free to modify this to your liking using the STP files I've included. 

Print Notes:

  1. As mentioned, this is made to fit the AM33D specifically, but you can resize them to fit whatever you need. You can also use the STP files to make granular changes to your print.
  2. If you want to use this for anything other than to hold a multimeter, you can remove the “Multimeter” word from the print by modifying the STP file. I may also include a file sans the word “Multimeter” when I have the time.
  3. When resizing, be mindful to not modify the hinges directly or to modify the hole sizes back to the original size. Otherwise, you won't be able to use M3 screws anymore.
  4. Printed in PLA at 0.16mm layer height. You can go higher but I was going for quality as well.
  5. The prints are a PITA to keep the edges from lifting. As you can see in the pictures, the edges lifted just ever so slightly and adds a bit of deformity to the final print but the outcome is generally acceptable. Do your best to keep the print surface as clean and tacky as possible to hold the layers down. Add brims if you want, it definitely helps but I've also seen it not do much. I also printed using Layerneer Bed Weld, which helps me print without the need of brims, but again the edges do still lift a tiny bit.

Tags