Anycubic Kobra 3 Side Cable Chain for Stock Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Contain your wires with this cable chain for the Kobra 3. Designed to replace the stock camera mount!
- Rating
- 4.235 / 5
- Likes
- 402
- Downloads
- 4,966
- Makes
- 18
- Views
- 14,764
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This model uses 22 links, 22 covers, 1 end, and 1 start.
I printed mine from PLA. Some supports are needed on the start and end.
This chain clips into the aluminum extrusion under the printer just like the existing wire managers. Thread the camera USB cable through these and then stick it into the cable chain with everything else. The top of the chain replaces the existing camera mount. If you don't have a camera, just use a single small screw to hold it in place (and then go get the camera, it's nice).
Good luck and happy printing!