Chip Can Challenge Model Rocket Builder's Kit
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.82 – €4.67 net (excluding VAT)
For file: C3-FIN-CAN_4FIN_0.3mm_PLA_MK3S_3h58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.24 excluding VAT (range midpoint).
- Weight reported by the author
- 59 g
- Print time reported by the author
- 3.96 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A fin can, nose cone, and launch lugs you can print to build a rocket from a can of hyperbolic paraboloid potato crisps.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 87
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fin can, nose cone, and launch lugs you can print to build a rocket from a can of hyperbolic paraboloid potato crisps. You'll provide the can, motor mount, shock cord, motor retainer, and other parts.
This is an example for people participating in Chip Can Challenge (C3) events.
I recommend printing the fin can with tree/organic style supports.
I've included an Open Rocket file for building this with a 29mm motor mount.
Important: Pay attention to the center of mass. You will need to add weight to the nose.