Rat Rig V-Core 4 - Printable Parts & Enclosure Panels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A premium quality DIY kit for a super sturdy, highly configurable, and easily upgradeable CoreXY 3D Printer.
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 515
- Makes
- 3
- Views
- 2,696
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
V-Core 4 Kit:
https://ratrig.com/3d-printers/v-core-4-category.html
The most up-to-date documentation (BOMs, CAD files, Build & Commissioning Guide) can be found at: docs.ratrig.com
This page provides the STL files for your V-Core 4 printed parts and DXF files for the enclosure panels.
All files are provided in the correct orientation for printing on a standard FDM 3D printer. In general, the printed parts are quite forgiving but are also quite large. If you suffer from drafts and/or poor bed adhesion you may need to use brims/rafts for some parts to prevent warping. The following table shows the recommended print settings when printing any of the parts provided.
Print Setting
Perimeters: 4
Line Width: 0.45mm
Layer height: 0.2 - 0.3 mm
Infill: 25%
Supports: None
Notice: When slicing the files you will notice that some of the holes are covered. This is intentional, to simplify the printing process - those layers are there to trick the slicer into building a bridge there. Once printed those need to be poked out with a screw, screwdriver, Allen key, or even a matching size screw.
