Broyhill Brasillia drawer pull repro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
reproduction of drawer pulls from Broyhill Brasillia china cabinet
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 51
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Takes small m3 heatsets. 3.8mm hole. added step if you want to increase diameter. Found it prints best with the arc pointing up/screw holes down w/ organic supports. YMMV
Printed with .12 layer height
5 perimiters
5 top/bottom layers
30% infill - gyroid
outer wall and top surface line width set to 3.5 - Lower will provide better resolution of the arc but that's as low as I went in test prints with a .4 nozzle
I tried a few orientations for printing, but they all left scars from supports. If you have a tool changer, and can print with opposing materials, a different orientation may print cleaner