Elecom Deft Pro Power Switch and Conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A power switch replacement for Elecom Deft Pro trackball mouse, with angle conversion when using different DIP switch.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
A power switch replacement for Elecom Deft Pro trackball mouse with additional angle conversion part if you replace the DIP switch with the top actuated version.
Elecom Deft Pro use a side-actuated MSK-23D18 DIP switch from Vimex to toggle between off/low/high power setting. This DIP switch will wear down over time, causing the trackball to occasionally become irresponsive. However, I can't find the exact same switch for sale within my area, so I settle with MSS-23D18 that is the top-actuated version of MSK-23D18, and since the pin position is different, I designed a conversion part that need to be attached on top of the original power switch.
Parts:
- Use MSLA/SLA 3D printer only, since the parts are very small.
Assembly:
- If you need to use the conversion part, you may want to use a power glue to attach the conversion part to the top of the power switch for a more secure fit, but this means you will need to destroy and replace the power switch if you ever need to replace the DIP switch again.
Designed by Diystrument 🇮🇩
Follow my socials IG, FB, Youtube, etc.. @Diystrument for more of our projects! https://www.instagram.com/diystrument/
Please carefully read the licensing section to see the appropriate usage of this design, thank you.
Tags