1 / 2
WinWing Ursa Minor - Desk Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Diy desk mount for WinWing Ursa Minor, with aditional hardware required.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 78
- Makes
- 0
- Views
- 1,468
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Create your own, winwing ursa minor desk mount.
Hardware required (for 1 stick holder):
- 4pcs: 20x20 aluminium profile corner brackets
- 4pcs: M5x10mm screws
- 8pcs: M5x8mm screws
- 5pcs: M5x12mm screws (2 for winwing, 3 for toggle clamp)
- 12pcs: M5 T-Slot nut
- 3pcs: M5 Hex Nuts
- 1pcs: GH-301AM Toggle clamp (5.5mm drill bit to make holes bigger for M5 screws)
- 1pcs: 20x60 aluminium profile - LENGTH: 85mm
- 1pcs: 20x60 aluminium profile - LENGTH: 240mm
- 1pcs: 20x60 aluminium profile - LENGTH: 250mm
- Optional: Rubber tape for better desk adhesion
Hardware example(what i used):
- https://opl.si/trgovina/alu-konstrukcije/alu-profili/alu-profil-20-x-60-u6/
- https://www.aliexpress.com/item/32870543302.html
- https://www.aliexpress.com/item/1005003023734101.html (Size: 20-M5)
- https://www.aliexpress.com/item/1005005933087150.html
- https://www.aliexpress.com/item/32810852732.html
- https://eu.store.bambulab.com/en-si/collections/adhesives-tapes/products/adhesive-foam-sponge-strip-roll
For profile covers i printed this(scaled to 101% for better fit): https://www.printables.com/model/1060193-20x60-cover