1 / 1
Titanium Tube Nut Holder for RatRig V-Core 4 300 — image 1

Titanium Tube Nut Holder for RatRig V-Core 4 300

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hold the nuts in place to secure linear rail to titanium tube.

Rating
0 / 5
Likes
4
Downloads
26
Makes
0
Views
194
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

When upgrading the X-axis aluminum extrusion to a titanium tube, this model holds the nuts in place on the inside of the tube to fasten a linear rail on top.

The nut holder model suggested by the titanium tube manufacturer was excessive in weight and size. The model i have created significantly reduces the weight and print time. It is designed for the 300mm version, and fits on the 300mm build plate as two identical parts.

There also exists a nut holder “wrench," but using this means the linear rail can not be adjusted later without removing the x-axis assembly. I make a lot of mistakes so I need the ability to adjust/re-align.

This model is made in halves; print two and push into each end of tube. The fin on one end of the part should be accessible, as this serves as a place to grab with needle-nose pliers for alignment.

Tags