Titanium Tube Nut Holder for RatRig V-Core 4 300
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold the nuts in place to secure linear rail to titanium tube.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When upgrading the X-axis aluminum extrusion to a titanium tube, this model holds the nuts in place on the inside of the tube to fasten a linear rail on top.
The nut holder model suggested by the titanium tube manufacturer was excessive in weight and size. The model i have created significantly reduces the weight and print time. It is designed for the 300mm version, and fits on the 300mm build plate as two identical parts.
There also exists a nut holder “wrench," but using this means the linear rail can not be adjusted later without removing the x-axis assembly. I make a lot of mistakes so I need the ability to adjust/re-align.
This model is made in halves; print two and push into each end of tube. The fin on one end of the part should be accessible, as this serves as a place to grab with needle-nose pliers for alignment.
