Mosquito M4 Mag Conversion V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't want to buy mp5 mags. You need one additional 20 mm m3 screw and nut and preferably a 4mm radius o-ring.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 68
- Makes
- 0
- Views
- 846
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- GNU General Public License v3.0
UPDATED, looks a little better now, have been working on one that alters the receiver as well but haven't finished…
Feed tube has a slot for an O-ring to go externally, I used one with a 4mm radius and hooked it over the squared off ledge on the other side to allow mag to attach properly. There is a cover for the hole that used to have the mag release, I didn't want to alter the receiver in any way so that you can still use the mp5 mags if you so choose.
I recommend rolling BBs through the feed lip once you put the o-ring on to make sure the BBs stop at the o-ring. If not, file the notch slightly and try again. They should barely get caught. Otherwise, the mag may not have enough power to push the BBs past.
You need to put old mag release hole cover nut in first, then cover, then the bolt. After that order doesn't matter.