pz35 - Easy film scanning at home! DSLR/Mirrorless
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scan film effortlessly at home with pz35, a device fraction of the price of competitors! Minimal Hardware required!
- Rating
- 5 / 5
- Likes
- 108
- Downloads
- 489
- Makes
- 6
- Views
- 3,067
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- BSD License
pz35
Want to scan your negatives but you don't want to go to a lab?
Looked at flatbed scanners or other DSLR scan solutions but got discouraged by the price?
I've got the project just for you!
It's cheap!
It's easy to assemble!
It's easy to use!
It requires minimal hardware!
Quick rant
The working principle of this device is extremely simple, it just positions film at set distance and parallel to your digital camera's sensor, but apparently some manufacturers think it's okay to charge over $200 for it.
TL;DR
It helps you scan film, cheaply
Requirements
DSLR or Mirrorless camera
Macro Lens OR Extension Tubes (cheaper)
(optional) Remote for your camera
(optional) Backlit drawing tablet
4x M3x12mm bolts
4x M3x4mm heat set inserts
If you don't have a remote for your camera you can either use the self timer function or even manually press the shutter button, in my experience it's stiff enough that pictures still come out decently sharp.
As for the drawing tablet, it's nice to have but you can use a well lit white wall or a sheet of paper as a background.
Assembly
Just sandwich the “pz35 mid” part between “top” and “bot” ones, make sure that the middle part sits on top of the bottom one creating a “track” for the film to go through.
Distance Tubes
Place camera and an object on a table
Manually set the focus ring to be roughly in the middle of it's range
Slide the object in front of the camera until it's in focus
Measure distance from the end of your lens to the object
Subtract 15mm from that distance
You might need to use one more or one less 10mm tube. Some lenses might be funky.
Camera Settings
I recommend shooting in aperture priority mode with f/8 to maximize the focus depth without distortion present in smaller apertures.
Set ISO to your sensor's native setting (usually 100 or lowest possible without "pulling").
Enable focus peaking if your camera supports it, it will greatly help with focusing if you're doing it manually.
Make sure to change file format to RAW, you want as much detail as possible.
Printing
Not much to it if your printer can do 45 degree overhangs it'll do it
Here's the printing orientation:

Filter thread sizes
I've provided adapters for several common filter thread sizes but if your lens isn't compatible with any of them feel free to send me a message and I'll upload the one you need.
Updates
2025-05-13 I've updated all the models so now all the threads have proper clearances, should work much smoother now. Also added 62mm lens thread adapter.